Smart Buildings
Smart Buildings in Chicago
Published by IOT Illinois Research & Editorial Team

- The Rule That Sets the Baseline
- A Smart Building Is a Data Layer First
- Where to Start
- Winter Is the Design Constraint
- Retrofits in Older Towers
- A Mid-Size Office Scenario
- Common Challenges
- What's Coming Next
- Explore More
- Frequently Asked Questions
- Which Chicago buildings must benchmark their energy use?
- What is the Chicago Energy Rating?
- Where should a Chicago building owner start with IoT?
- Can older buildings be made smart without major construction?
- Does smart building technology raise tenant privacy concerns?
- How do I secure building automation systems?
Chicago has more commercial floor space than almost any city in the country, and a large share of it was built before modern building automation existed. Owners here also face a rule that most other cities do not: public reporting of how much energy a building uses. That combination makes Chicago a distinct market within Smart Buildings. This guide is written for owners and managers deciding where to begin. It focuses on the rules that shape the work, the systems worth connecting and the order that tends to pay off. For the wider market picture, see why Chicago smart buildings are a major IoT opportunity.
The Rule That Sets the Baseline
Chicago's Energy Benchmarking Ordinance requires owners of larger buildings, generally those of 50,000 square feet or more, to report annual energy use through ENERGY STAR Portfolio Manager. Reports cover the prior calendar year and are due each June 1. Data must be verified by a licensed professional every three years, and buildings receive a public Chicago Energy Rating of one to four stars that is posted at the entrance and disclosed when leasing or selling. Penalties for non-compliance accrue daily. Details can change, so confirm current thresholds and deadlines with the City's benchmarking program before you plan.
Why this matters for IoT: a building that can only read monthly utility bills reports one number and learns nothing. A building with sub-metering and live data can see which floors, systems and hours drive the total, and can show improvement in the next year's rating.
A Smart Building Is a Data Layer First
Many owners start by buying a device. A better start is a plan for data. Most large Chicago buildings already have a building management system, often with several generations of controls from different vendors. The first goal is to get information out of those systems into one place in a consistent form, using open protocols such as BACnet where they exist. Gateways are the tool for this, as explained in IoT gateways for legacy equipment, which applies to old mechanical rooms as much as factories.
| System | What to Connect | Why It Matters in Chicago |
|---|---|---|
| Electric and gas metering | Floor, tenant and major equipment sub-meters | Supports benchmarking and tenant billing |
| Heating plant | Boilers, pumps, supply and return temperatures | Winters drive the largest energy swings |
| Cooling plant | Chillers, towers, condenser water | Summer peaks affect demand charges |
| Air handling | Fan status, damper position, filter pressure | Links comfort, energy and air quality |
| Occupancy | Badge, Wi-Fi or sensor counts | Hybrid work changed how space is used |
| Indoor air | CO2, particulates, humidity | Tenants increasingly ask for proof |
Where to Start
- Read what you already own. Pull trend data from the existing building management system and utility accounts. Many buildings find hours of simultaneous heating and cooling that need no new hardware to fix.
- Add meters where answers are missing. Sub-metering a tenant floor or a chiller plant often pays back through better billing and tuning.
- Fix scheduling. Schedules set years ago may no longer match occupancy. Aligning them to actual use is among the lowest-cost savings.
- Connect alarms to action. A fault that reaches the right technician in minutes costs far less than one found on the next monthly walk-through.
- Scale to analytics. Once data is reliable, add fault detection and optimization software.
Winter Is the Design Constraint
Chicago buildings must handle long cold stretches, so monitoring has to cover freeze risks, boiler reliability and stack effect in tall buildings. Our guides on heating Illinois commercial buildings in winter and summer and surviving a polar vortex show what to watch and what to automate.
Retrofits in Older Towers
The Loop and River North have many older towers where running new cable is expensive. Wireless sensors, clamp-on meters and software overlays make upgrades possible without opening walls. Examples and cost ranges appear in our look at Chicago Loop smart building retrofits and the piece on older office buildings turning to sensors. Offices converting to housing have different needs, covered in downtown revival and residential conversion.
A Mid-Size Office Scenario
Consider a 400,000 square foot office building in the West Loop with a 1990s control system. The owner's first benchmarking report shows weak performance against similar buildings. A consultant reads the existing data, finds that air handlers run at full schedule although occupancy is about half of pre-2020 levels, and discovers a chiller operating below its efficient range. The team adds sub-meters on two tenant floors and the chiller plant, resets schedules and tunes setpoints. The next year's data shows measurable improvement and supports a better rating, which helps with leasing conversations. The sensor budget was a small share of the total, and most of the value came from using data that already existed.
Common Challenges
Fragmented Systems
Controls from several eras rarely speak the same language. Plan for translation and consistent naming from day one.
Tenant Data and Privacy
Tenant energy data is needed for benchmarking, and occupancy sensing can raise privacy questions. Use aggregate counts rather than tracking individuals, and be clear with tenants about what is collected.
Cybersecurity
Building systems are networked devices. Segment them from tenant networks and control vendor access, following the same ideas as industrial IoT cybersecurity.
Split Incentives
Owners pay for upgrades, while tenants often get the bill savings. Lease terms and green lease clauses help align interests.
What's Coming Next
Expect more owners to treat benchmarking data as a leasing and financing factor, and more building systems to ship with open data connections. Expect electrification of heating and growing electric vehicle charging to add new load questions, as in managing EV charging load with IoT. Local suppliers are listed in the Chicago Smart Buildings directory, and companies such as Environmental Control Solutions and Dynamic Controls appear in our company listings.
Explore More
Browse more Smart Buildings articles, and see IoT in Chicago.
Frequently Asked Questions
Which Chicago buildings must benchmark their energy use?
Generally commercial, institutional and residential buildings of 50,000 square feet or more, plus smaller municipal buildings. Confirm current thresholds with the City's benchmarking program.
What is the Chicago Energy Rating?
It is a public rating of one to four stars, based on reported energy performance, that must be posted at the building entrance and disclosed when leasing or selling.
Where should a Chicago building owner start with IoT?
With data already available: utility bills and the existing building management system. Fix schedules and obvious waste, then add sub-meters where answers are missing.
Can older buildings be made smart without major construction?
Yes. Wireless sensors, clamp-on meters and software that reads existing controls allow upgrades without opening walls or rewiring entire floors.
Does smart building technology raise tenant privacy concerns?
It can, especially with occupancy sensing. Use aggregate counts rather than tracking individuals, disclose what is collected and follow applicable Illinois privacy rules.
How do I secure building automation systems?
Keep them on separate networks from tenants and offices, control vendor remote access with multifactor authentication and keep an inventory of connected devices.
